|
|
Business centre
Soudek, Jan ; Šmak, Milan (referee) ; Bajer, Miroslav (advisor)
The subject of this thesis is the design and assessment of steel construction of the shopping center in Chrudim in Pardubice region. Business center was designed as a three-aisled with a common space in the middle. Each hall has a platform 48.0 meters x 63.0 meters, shared space is a ground plan the shape of an equilateral triangle with sides of 48.0 meters. The construction of halls in the transverse direction comprises three trusses. The two beams are to span 20.0 meters and a span of one to 8.0 meters. Clearance height ranges from 8.0 to 10.0 m. The main structure is made of rectangular hollow sections, tubes of circular profiles and will be awarded. The axial distance trusses is 7.0 meters.
|
|
|
Self service shoping centre - construction technological project
Prusková, Nikola ; Špinar, Petr (referee) ; Kantová, Radka (advisor)
The diploma thesis deals with the construction technological project of a self-service shopping centre in Stará Plesná village. Time and finance plan, design of machinery and project of building site accessories were elaborated. The work is focused on the main building object SO 101 (Shopping and service centre). For this building pile foundations and top coarse building phase were worked out in greater details. Time plan, item budget and other documents concerning building preparations of object SO 101 are also parts of the work.
|
|
|
Trade House in Brno
Serbousková, Kateřina ; Sýkora, Karel (referee) ; Barnat, Jan (advisor)
The final thesis deals with the design of the steel loadbearing structure of the shopping center situated in Brno. The built-up floor area is 1973 m2 (L-shaped ground plan with dimensions 48 m x 50 m). The construction consists of three parts. Building A has four above-ground floors and reaches a height of 25.5 m. The steel structure of mono-pitched roof is designed in two options. Both options consist of full-length purlins and truss girders. Building B is a single-storey building with a mono-pitched roof top reaching 8.1 m high. Building C is three-storey with a flat roof. The first floor has a construction height of 4.5 m and the remaining two floors reach height of 3.6 m, which coincide with building A. The steel structure is made of steel-concrete composite ceilings and pin-supported columns. In the case of bracings, pressure was eliminated by means of non-linearities.The work includes proposal, assessment of the supporting structure and calculation of the directional details. Internal forces were determined based on a static analysis in the SCIA Engineer calculation program.
|
|
|
Business and office centre
Novotný, Petr ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
The aim of this master´s thesis was design and analysis of a steel supporting structure of a building for business and administration purposes in Ostrava. It includes an assessment of the main load-bearing construction elements and the selected connections. The thesis also contains the design documentation of the building and compares two different variants of the steel construction design.
|
|
|
Reinforced concrete flat
Marčanová, Martina ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The aim of the bachelor thesis is to design selected structures of the multi-storey department store. The supporting structure is a cast in place reinforced concrete frame. A reinforced concrete flat above the lowest floors, an inner column, a foundation pad and a prefabricated reinforced concrete staircase were selected for the work.
|
|
|
City House – Mixet Use Architecture
Salva, Martin ; Ing.arch.Pavel Šimeček (referee) ; Menšíková, Naděžda (advisor)
The project deals with completion a REC block buildings in Brno – Zábrdovice, defined by local roads. For the design of mass was used a porosity principle, when the site was covered with maximum static mass cutted by dynymic communication-optimal connections through the object. Object has five floors and a basement with garages and technical facilities. In the 1st floor and the part of 2nd floor are business premises, on the 2nd and 3rd level are administrative premises. On the part of a 3rd floor and in 4NP and 5th floor there are apartments. The foundations of an object is the reinforced concrete slab, the constuction systém is formed by reinforced-concrete columns with brick walls. Ceilings and staircases are monolithic reinforced concrete. Object is topped by a flat roof, part of the roof is greened.
|
|
|
Steel structure of a business centre
Kočí, Petr ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The diploma thesis elaborates on the proposal of a loadbearing steel structure of a shopping centre. Four-storey building has total lenght of 88 m, width 48 m and its base structural grid is 8 x 8 m. The total height of building is 25,4 m. First three floors above ground are designed with structural height of 5,6 m whilst the 4TH floor uses height of 4,0 m. Frame structure is formed by primary beams and castellated secondary beams. Above 4TH floor, the roof structure is designed in two alternative versions, both using solid purlins and truss girder. The 3D computer animation of the building is also part of thesis. The shopping centre that is subject of the final thesis is located in Brno area.
|
|
|
An air conditioning in the shopping center
Pospíšil, Tomáš ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
The bachelor thesis is divided into three parts: theoretical, computational and projection. In the practical part of the bachelor's thesis I solve the design of the air-conditioning of the shopping center, which includes the main commercial space and the respective rooms. In the theoretical part I deal with acoustics in air-conditioning. Sources of noise and possibilities of their attenuati-on.
|
|
|
Heating of Trade Center
Jankes, Filip ; Rubinová, Olga (referee) ; Horák, Petr (advisor)
Thesis aim was to propose a heating of trade center. Proposing were only a side rooms of the building away from the main shopping area. The theoretical part deals heating surface. In the computation section are perform calculations, designs and sizing of the heating system and all other necessary equipment. The project part contains the technical report and drawings. The building of the trade center is mostly single storey only with a few extensions of the second floor. Near the object stands two outbuilding for technical equipment and water tank.
|
|
|
Developer Activities in the Context of Construction of Shopping Centers
Zuzaňáková, Markéta ; Vaňková, Lucie (referee) ; Korytárová, Jana (advisor)
This thesis deals with the determination of cash flow and the assessment of the economic efficiency of a development project of the shopping center. It is divided into theoretical and practical parts. The theoretical part summarizes information about the project, feasibility study, development projects, phases of the project life cycle, ways of financing, risks and setting the cash flow of the project. The practical part is divided into two parts. The first one presents an overview of shopping centers, department stores and retail parks in the Czech Republic and the second focuses on the assessment of actually performed development project of the shopping center - a retail park in terms of cash flow and economic efficiency. The aim of this work is to get familiar with the sphere of retail development project and its assessment concerning whether it is acceptable for implementation in the terms of cash flow and economic effectiveness and to what extend.
|
guest ::
